How To Restore Calphalon Pots And Pans

How To Restore Calphalon Pots And Pans

Calphalon is famous for its high-quality cookware made of durable materials. However, just because their pots and pans are strong and damage-resistant doesn’t mean that they’re immune to damage, and sometimes you might end up burning your cookware.

But don’t worry, because restoring your Calphalon pots and pans is actually easy – and we’re here to show you how!

In this handy guide, we’ll teach you how to restore Calphalon pots and pans with three simple methods. So let’s get started!

What Are Calphalon Pots And Pans Made Of?

Before we can take a look at how to restore your pots and pans, it’s important to know what they’re actually made of first.

Calphalon cookware is well-known for its unique blend of quality materials.

Its pots and pans are made using a base of hard-anodized aluminum and a top layer of strengthened stainless steel, finished with a dual-layer nonstick coating for the best cooking experience possible. This might all sound like a load of jargon, so let’s break it down.

Hard-anodized aluminum is a special variety of aluminum with superior strength and conduction, helping you to maintain consistent heat throughout the whole pan.

Meanwhile, the stainless steel layer prevents corrosion and warping even after heavy use. Finally, the nonstick coating keeps anything from sticking to the inside of the pot or pan. Combining these high-quality materials means that Calphalon cookware is some of the best out there.

Restoring Your Calphalon Cookware: 3 Easy Methods

Restoring your Calphalon pots and pans is simple, but it’s important to use the right technique for the job. Depending on the damage you’re trying to fix (such as scratches or burns) you may need to use a different method.

Here are three easy ways to restore your Calphalon cookware!

Soak In Vinegar To Remove Burns From The Outside

Sometimes the outside or bottom of your Calphalon pot or pan can get burned by exposure to a flame. Luckily, this is easy to fix as long as you catch it early on. Here’s how to fix it:

First of all, mix equal parts white vinegar or lemon juice and water together in a basin. Then, put your burned cookware into the basin to soak for at least 15 minutes.

This will remove a lot of the blackened parts burned onto the pot or pan, as the acid in the vinegar or lemon juice will react with the residue and lift it off.

After letting your cookware soak, pour out the dirty solution. If there is any remaining residue, use a soft sponge to scrub away until it is all gone.

However, if there is still a load of stubborn residue still burned on, give the pot or pan another soak in the solution until the remainder comes off. Feel free to add some mild dishwashing liquid to help you remove the last few spots of residue.

Once all the burnt residue has been removed from the pot or pan, rinse it with warm water to ensure that all of the solutions have been washed away before you use them next.

Remove Burns On The Inside With Dishwashing Liquid

For minor burn residue on the inside of your Calphalon pot or pan, you can use dishwashing liquid to get it back to normal.

Start off by adding a small amount of mild dishwashing liquid into your pot or pan, trying to target the most damaged areas. Leave it to spread around the inside of the pot or pan for a moment.

Then, put the pot or pan on the stove and switch it to medium-low heat and wait until the dishwashing liquid starts to simmer.

Once the pot or pan starts simmering, leave it for 15-20 minutes. After this, switch the heat off under your cookware and leave it to cool down for another half an hour. This will give the dishwashing liquid a chance to soak in and react with the burned parts of your Calphalon pot or pan.

When the pot/pan is cool enough, use a soft sponge or soft-bristled brush to scrub away the burnt parts inside. Because of heating up and soaking the dishwashing liquid, the burnt residue inside your pot or pan will be much easier to remove and will flake right off!

Rinse the cookware multiple times until it stops making bubbles.

Using Baking Soda To Fix Major Burns

Badly burned pots and pans can seem trickier to fix, bu55 luckily these are also simple to deal with. First, make a solution of baking soda and water by adding a few drops of warm water to some baking soda.

If the burn damage is on the outside of the pot or pan, leave it to soak in a basin filled with this solution; if the damage is inside, fill the pot or pan with the solution and leave it to soak inside.

How To Restore Calphalon Pots And Pans (1)

Let your cookware soak in the baking soda solution for 1-2 hours. Once the time is up, use a soft sponge or soft-bristled brush to gently scrub away any stubborn bits of residue. Take care not to scrub too roughly in order to protect the surface of your pot or pan.

Don’t worry if the burnt layer isn’t fully removed – in this case, pour out the dirty solution and repeat these steps with more baking soda and warm water. If the solution turns brown while the pot/pan is soaking, this means that it is reacting with the burnt residue and you’ll need to scrub again.

Finally, rinse off the last of the dirty solution with some mild dishwashing soap and a non-abrasive cloth or sponge.

Conclusion

It can be worrying when your Calphalon cookware gets damaged, but don’t think it’s the end of the road for your pots and pans. By using these simple methods, you can easily restore your Calphalon cookware to its original condition!

So if you’ve burned your pots and pans, don’t worry – use the tips and tricks in this handy guide, and you’ll be able to restore your Calphalon pots and pans in no time!

Brandon White
Latest posts by Brandon White (see all)

Leave a Comment

Your email address will not be published. Required fields are marked *